104/35-36 Moo 12, Bang Pla, Bang Phli, Samut Prakan 10540 | 02-174-6176 | sale@uniqueproducts.co.th
Logo

SUPERFLOR HC

SUPERFLOR HC

หมวดหมู่ -
รหัสสินค้า superflor-hc

Superfloor HC is a self levelling flooring , a mixed that can be spread with a V-notched sqeeges or trowel . These system are the answer for both new construction and renovated areas , and can be installed over most sound floors. When cured ,produces a danse non porous floor that chemical and dirt resisitance.

SURFACE PREPARATION :

Surface  must be aclean, Remove all dirt , grease and other foreign matter by cleaner and sandblasting , or mechanical abrasion . 

Remove water and dust from the surfaces

 

RECOMMENDED SYSTEM :

PRIMER TOP COAT
- SUPERFLOR BH CLEAR - SUPERFLOR HC COLOR

STORAGE AND HANDLING :

Storage 

The product must be store in well ventilated place protected from high temperature. Container must be kept tightly closed .

Handing 

Handle with care . Stir well be for use .

Packing

part A= 16kg

part B= 4kg

partA=4kg

partB=1kg

HEALTH AND SAFETY :

Avoid contact with skin and eyes wear . Wear suitable protective clothing such as overalls during. Avoid skin contact . Spillage on skin should immediately be remove with soap and water.
Eyes should be flushed with water and medical attention sought immediately.

คุณสมบัติ
  • • Flooring , Beverage processing , Cleaning room , Food preparation and service , Chemical processing , warehouses etc.
ข้อมูลการใช้งาน
  • • Application method | Trowel with putty knife and V-notch sequeeges / Brush Roller
  • • Mixingratio A:B ; 4: 1 by Volumn
  • • Potli Clea
  • • fe er
  • • 30m Thin
  • • inutes @ 25 deg C ner 4K No. 65
ปริมาณ
  • • Small Pack : 3 Litres
  • • Big Pack : 12 Litres
มาตรฐาน
  • • -
แท็ก
สีอีพ็อกซี่ปรับระดับตัวเอง Self-Levelling Epoxy Flooring System หนาแน่น ไม่ดูดซึม Non-porous งานพื้นใหม่ ทับบนพื้นเก่าสภาพดี
ข้อกำหนดเชิงเทคนิค (รูปแบบ: ป้ายกำกับ|ค่า)
Colour According to colour card
Solid content (%) 100
Specific gravity 1.85 - 1.15 (part A) , 1.55 - 1.85 (Mixed)
Drying time @25 deg C Dry to touch 4-5 hours
Surface Concrete
Flash point 80+2degC
Flim thickness per coat 3000 Microns (self Leveling) , 100 Microns (coating)
Self-Leveling 3.8-4 sq.m/Set(A+B=20kgs.)
Coating 25 sq.m/Set(A+B=5kgs.)