| หมวดหมู่ | - |
| รหัสสินค้า | neocoat-intumescent-paint-w |
Neocoat intumescent - W is a water base fire retard coating . It 's dries quickly . Upon exposure to fire or excessive heat, the coating puffs up and forms a thick, dense, cellularform to have required fire protection on structural steel.
APPLICATION :
Tools | Roller / Brush / Airless Spray
Mixing / Cleaning | Clean Water
Dilution (%) 15-20 %
APPLICATION SYSTEM :
Surface preparation
The steel surface to ensure it is free from oil, grease, rust, salts, dust, and other contaminants that may affect paint adhesion.
Degreesing
Clean the surface using suitable solvents or industrial degreasers to remove all traces of oil and grease. Wipe down with clean rags soaked in thinner if necessary.
Rust removal
Perform abrasive blasting to achieve ISO 8501-1 Sa 2.5 or SSPC- SP 10 (Near White Metal Blast Cleaning) for optimal cleanliness. If blasting is not possible, use mechanical cleaning tools (e.g., wire brushing, grinding) to meet ISO 8501-1 St 3 (Very Thorough Manual Cleaning).
Painting System (Enamel)
Primer Coat | NEOCOAT PRIMER
Fireproof Coat | NEOCOAT INTUMESCENT PAINT - W
Topcoat | NEOGLOSS ENAMEL COLOR
Painting System (Epoxy)
Primer Coat | SUPERGUARD ZINC H / SUPERGUARD HB-SS
Fireproof Coat | NEOCOAT INTUMESCENT PAINT - W
Topcoat
SUPERGUARD FX-G COLOR (Interior)
SUPERGUARD PU 777 COLOR (Exterior)
Recommendation
The surface to be painted should have a temperature between 10–50°C, and the relative humidity should not exceed 85%.
AIRLESS SPRAY APPLICATION :
Spray Tip Model | No.311
Type | Airless Spray Tip
Application | Fine Finish and Medium-Sized Surface Coating
Orifice Size | 0.311 inches ( 0.79 mm.)
Fan | 60°
Flow Rate | 0.6-0.9 Gl./Hr.
Output Pressure | 2500-3000 PSI
HANDLING AND STORAGE :
Storage
The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well ventilated space and away from source of heat and ignition. Containers must be kept tightly closed.
Shelf Life | 2 years
Packing | 18.925 Ltr.(22 KGS.)
HEALTH AND SAFETY :
Please observe the precautionary notices displayed on the container. Use under well ventilated conditions. Do not breathe or inhale mist. Avoid skin contact. Spillage on the skin should immediately be removed with suitable cleanser, soap and water. Eyes should be well flushed with water and medical attention sought immediately.
| Type | Acrylic Water Base Fireproofing |
| Color | White / Grey |
| Film Appearance | Matt |
| Solid Content (%) | 76±2 |
| Specific Gravity | 1.25-1.30 |
| Wet Film Thickness | 500 microns |
| Dry Film Thickness | 250 microns |
| Theoretical Coverage | 1 sqm. / kg @ 500 microns |
| Touch Dry (25-30 °C) | 1-2 hours. |
| Recoat Dry (25-30 °C) | 4 hours. |
| Hard Dry (25-30 °C) | 72 hours. |